Questions tagged [unit-conversion]
Code whose primary purpose is to convert quantities from one system of measurement to another
93
questions
1
vote
2answers
43 views
Time Converter - Python Tkinter - General comments on code
I have been learning python since being in lockdown, this is the first Tkinter application I've built without consulting the internet or seeking help anywhere.
It is a time converter where you can ...
2
votes
3answers
67 views
HTML/JavaScript temperature converter with rounding
I am looking to improve the performance of my code through best practices and cleaner code.
My goal here is just to perform a conversion whenever there is a keyup.
But I noticed that my code looks ...
6
votes
4answers
908 views
Bytes to binary conversion function
I created a quick function to convert n bytes into binary for my student.
She is not on that level yet, but I think it would be best for her if my demonstrative ...
4
votes
1answer
763 views
Java Temperature Converter
I have made a program that converts Celsius to Fahrenheit and Fahrenheit to Celsius. How is my code?
...
5
votes
2answers
105 views
Code to support different measurement systems
I am developing an application in which the user can use different measurement systems. Currently,
there is support for the metric and imperial measurement systems. To support these systems, I wrote ...
3
votes
0answers
121 views
Yet another Fahrenheit and Celsius converter
Introduction
I am recently learning Rust by reading The Rust Programming Language (a.k.a. the book). I have finished the first three chapters so far, and this is my attempt for the first exercise ...
3
votes
1answer
78 views
Convert a binary string, with each char separated by spaces, into a normal C string and print
This code is a purely for-fun project and it comes from this challenge at freeCodeCamp. This is simply an algorithm challenge which is usually meant for JavaScript, but I decided to perform in C. It ...
7
votes
2answers
141 views
Pythonic attempt at conversion of length
I'm trying to learn Python, so I started with a program to convert length units, mixing imperial and metric. First I wrote a bunch of small simple functions, but then I wanted to solve the issue of ...
4
votes
1answer
153 views
fasm convert hex byte to binary string
This fasm x64 (Linux) code seems very crude and repetitive, but it gets the job done. How could I perform this task in a more idiomatic manner?
...
6
votes
2answers
2k views
Angular control for inputting latitude and longitude with validation
I've built a custom control to handle user input in a human-readable format, but save in a machine-format.
It needs to have input validation, and to convert UI-input to a base format.
I'm interested ...
7
votes
2answers
136 views
Java command-line API client to fetch Bitcoin exchange rates
I am building a simple Java command-line application. And I want to know the best practice and make my code clean. Can anybody suggest to me how many different classes I can make and what more method ...
4
votes
2answers
109 views
Two classes to avoid confusion when handling degrees and radians
Experimenting with operator overloading for the first time. Based on my reading, it appears to be a bit of a minefield.
Have I fallen into any traps?
...
1
vote
1answer
164 views
What should I change in my currency converter? [closed]
I wrote a simple currency converter in Python. Right now, my currency
converter converts using the last available rate or converts using a
specific date.
Looking for:
I'd appreciate any tips ...
4
votes
2answers
99 views
Convert light-years to other representations
the code is very messy, long and I am looking how to shorten it and/or simplify it. There are a lot of repeated variables, for example; 'hourToDay' and then 'hourToDay1', 'hourToDay2' and so forth. ...
11
votes
3answers
2k views
Convert a string like 4h53m12s to a total number of seconds in JavaScript
At the moment I have this:
...
3
votes
2answers
189 views
Simple OOP currency converter - follow-up
This is a follow up question on this post
This is what I changed on my previous code:
I use Exchanger and PairCurrency class ...
7
votes
2answers
2k views
Simple OOP currency converter
I am learning about OOP so it would be great if you can give me feedback on how to improve my code and OOP design.
This is a currency converter. Firstly, it will call a method to add 2 currencies and ...
2
votes
1answer
103 views
Temperature and currency converters in OOP JS
I just started learning OOP from Mosh on YouTube and I looked for easiest exercises to practice. Can I get a feedback on my code please? What I did wrong and what I should change?
In the code there ...
6
votes
3answers
2k views
Python 3 - simple temperature program version 1.3
Thank you to everyone for the feedback provided to the initial version of this program posted here.
Please find below the newest version, revised based on the comments provided, for review and ...
14
votes
3answers
5k views
Python 3 - simple temperature program
I have been teaching myself Python (as well as Tkinter) and today one of the sites I was reading, asked us to write a program to covert one value from Fahrenheit to Celsius, once - an easy three line ...
4
votes
0answers
541 views
RGB to YCbCr conversion in Java
I found a Go language code to do RGB to YCbCr conversion from here! I ported it to Java:
...
5
votes
0answers
167 views
Converting between cooking measurements
I've made an Android app that converts between cooking measurements, taking into account the type of product you use (that way it can convert between mass and volume by using the density). What are ...
4
votes
1answer
270 views
Enum class for weight units
I have some enum classes for units, like Weight units (KG and LB). I am translating the code to Qt C++ from Java, and I'm wondering what the best way to do this is as enums cannot have constructors in ...
3
votes
1answer
244 views
Convert bitcoin value based on exchange rate from JSON API
I’m learning F# and trying to find a more ‘functional’ way to code a simple program that retrieves the price of BTC and calculates the EUR value of an amount of Bitcoin.
...
0
votes
1answer
52 views
Temperature and speed unit converter class in JS
This is what I came up with, but I'm not sure if:
putting it in Class is the best approach
multiple repeats (this.val etc.) are acceptable
there is a better ...
3
votes
2answers
251 views
Asking 2 values, feet and inches, and it converts them to centimeters
I was doing an exercise in PHP, and it works perfectly, no problems. But I think that maybe I coded it so long, and I think it can be shorter than it is now, but I don't know how to make it shorter ...
3
votes
1answer
225 views
Temperature calculator in Rust
Just on a chapter 3 of Rust Book so not much good in Rust.
so tried to implement a simple temprature calculator as suggest in this chapter.
so i would like you guys to point anything you feel
...
2
votes
2answers
151 views
Calculator to add time intervals
I have written a little program that calculates the time by given strings.
A time string in the context of this program consists of a number and a following letter that can be s, m, h, or d.
You can ...
4
votes
1answer
201 views
Performing unit conversions using intermediate conversions
Challenge:
Two input files are given The first contains |N| ratios in the form of
two labels and a ratio:
USD, GBP, 0.69
Meter, Yard, 1.09
YEN, EUR, 0.0077
GBP, YEN, 167.75
...
7
votes
2answers
2k views
Fahrenheit and Celsius converter in Rust
I made a program that converts between Celsius and Fahrenheit. Is there any way that I could make this code more efficient and cleaner?
...
3
votes
3answers
126 views
Beginner radian/degree converter program
I'm a bit of a beginner when it comes to Java, and I created this small code to help me grasp a few small subjects. It allows its user to convert a radical to a degree measure and a degree measure to ...
7
votes
2answers
312 views
Unit conversion program into metre and stored input
I was curious as to how I'd be able to make this much clearer to read because from my perspective I understand what does what but how does it look to a third party? Also how are my object / method ...
3
votes
1answer
99 views
Temperature converter in Rust with input error handling
I started learning Rust a few hours ago with the Rust Book (2018 edition) and as part of one of the exercises decided to make a temperature converter. I wanted to make sure it handled all inputs ...
5
votes
2answers
107 views
Custom data type - "Binary" Float (0-1.0)
In my current game I have the need for values ranging from 0 to 1, or from -1 to 1. The values should never exceed this threshold, so instead of constantly validating the values I made a custom data ...
2
votes
0answers
47 views
SI type safe unit calculations (revised)
This is the continuation of the questions raised in this thread
I did include the improvements that were mentioned but still feel like, I do more copies than I need to. Also I am unsure about the ...
4
votes
1answer
76 views
SI type safe unit calculations
I wrote a small type-rich MKS Unit system for the consistent and safe calculation of physical units in everyday use.
I realized some operators' implementations via the Barton-Nackman trick while ...
1
vote
2answers
835 views
Unit of measure class for mass in java
I was looking at this answer on SO to handle units in java. The concept was interesting to me, except I didn't like that it had to be per object that had mass, instead of encapsulating a ...
4
votes
2answers
6k views
Convert a string in time format to minutes
I am new to C#. I just created a method where I can convert a string with the format HH:MM AM/PM to minutes. I was wondering if there is a better or more effective way to achieve the same result.
<...
2
votes
2answers
109 views
Pounds-to-tons converter
Finished my first lone project and I'm wondering if the execution is passable. This is a basic lbs to tons converter. The customer drives on the scale loaded, then dumps the load and returns unloaded ...
3
votes
1answer
114 views
Enhancing a Conversion calculator
Could I please have some ideas how to improve this conversion calculator I have made. I am currently not looking to add any more quantities, but rather trying to enhance the usability and add some ...
5
votes
1answer
135 views
Pretty print uptime given seconds and omit unnecessary strings
Given an integer number of seconds, return a string which represents in human readable format the number of days/hours/minutes/seconds that are equivalent.
...
4
votes
2answers
101 views
Function to convert strings from hmmss, mmss, ss format to milliseconds
Here's the current logic to convert strings in the format hh:mm:ss, mm:ss or ss to ...
14
votes
5answers
1k views
5
votes
2answers
6k views
Convert geodetic coordinates to geocentric (cartesian)
I'd like to retain as much float precision as possible without having to resort to specialized libraries so I need this code to work with only standard modules.
I'm doing this in QGIS where ...
4
votes
1answer
398 views
Simple unit converter and shipment builder
My first python program top to bottom used for work.
First it converts units from imperial to metric and vice versa, then adds the dimensions to a shipment and prints the shipment. When you do a new ...
8
votes
3answers
2k views
Temperature converter using "switch" statement
I wrote a program to convert temperature into different units, where the users have to put a space between temperature and unit:
23 f, 34 c, 45 k
...
8
votes
1answer
3k views
Python beginner code for a currrency converter
I am also pretty new to Python so I want to show my code for a very small currency converter with an Tkinter GUI.
The code does what I want, but now I want to optimize it and find new "next level" ...
13
votes
5answers
5k views
Temperature unit conversion (C,F,K) in C++ - follow-up
Link to my first question:
Converting Celsius and Fahrenheit in C++
I've improved my code, following @Jamal's recommendations. I hope I did everything right. The only thing I didn't get was putting ...
6
votes
1answer
823 views
Converting Celsius and Fahrenheit in C++
I've made my first little program written in C++ and was wondering if anyone could evaluate it and suggest some improvements. No copy paste. I was wondering if I can do something with my little ...
3
votes
1answer
759 views
Temperature converter with JavaScript
This is one of my first simple javascript projects. Feedback is appreciated! Basically, everytime the select option is changed, the result is shown.
...
